10") Double Build

Here's how we did it.

Sunday, April 27, 2014

Posted by Toxic Goblin at 5:03 PM

We are building 2 virtual pinball machines at the same time. That is how we roll. :)

Plunger

Our plungers didn't come with the proper plate to mount them .. so we made our own. Perfect fit. This is the first try at l...
Construction Completion

Installation of the playfield lightbox Installation of the glass (fingerprints everywhere!) Cutting the side rails to fit ...
Gotta have cup holders!

Installed collapsible cup holders on each side.
Backbox Construction

Carefully measuring, drilling, cutting and routing out the holes for the speakers, DMD, monitor and sound-activated lights. Everythin...
Let there be lights!

5M blue LED Strip installed Testing them out Perfect glow!
Testing out the new sound activated lights.
Lining It All Up

Everything measures out and fits together perfectly so far :)
Painting

Sanded and primed. 2 coats of primer, 2 coats of black. Inside and out :)
Cuts For Tub Hardware

There was a lot of careful math involved in getting all this stuff laid out perfectly. Holes for the plunger and coin doors don't...
Putting It All Together

We added a shelf to the tubs, and tied tied it all together with bolts and wing-nuts for easy dis-assembly. A nice big hole was cut f...